Week 10 - Beginning Our Rapid Prototyping

This week's meeting consisted of a quick recap of where we're all supposed to be in terms of our progress, and free time for all subgroups to work on their projects.

Many of our components that we ordered arrived, therefore we were able to begin setting up our rapid prototype. We were able to test all the RFID tags and note their unique ID's, begin setting up our breadboard with our components (start/terminate buttons, servo, RFID reader, etc.), work on soldering the pins for our motor driver, and attaching an encoder to our new DC motors that came in.




Comments

Post a Comment

Popular posts from this blog

Week 28 - Bugs and Discovery Channel

In this week's session, we continued testing and refinement of our code. We were also told that the Discovery Channel is coming in next week (5/9/18) to film the Spartan Superway project while we are all testing and preparing for Maker Faire. When sending directions via the GUI, we came across a previously unnoticed bug. After requesting the pod to go to station 12, we noticed that the notification LED would turn blue (as expected) but once the pod reached the station, it would stop, then the LED would light blue again and the pod would go around the track and stop again at station 12. We realized that the problem was because the Serial port remained open after we requested a podcar. Because of this, the request would go through as many times as we pressed the "Request Pod" button on the GUI. To fix this, we simply closed the serial port after a request had been taken in by the Arduino, and opened the port back up after the podcar reached its requested destination. Th...
Read more

Week 8 - Presentation 2 and Swift Nav. Meeting

In this week’s meeting, all the sub-groups of the Small-scale team were able to communicate their progress and future plans to the rest of the Spartan Superway team via Presentation 2. We were the first to present and thereafter we sat back and enjoyed being briefed on the rest of the teams’ progress. Our Presentation 2 is provided below, with more detail about each slide within each 'Speaker Notes' section, respectively. Before we began presenting, Dr. Furman informed us that there is a group in the ME 106 class whose project involves GPS work and that a few representatives of Swift Navigation will be coming to discuss the specifics of their technology with them (The Piksi Multi, found here ).  We, the controls team, were told that we could sit in on the meeting if we chose to do so because the idea of GPS for position sensing has been thrown around for Small-scale, as well as for Full-scale. The meeting was geared more towards the 106 team and questions they had on the P...
Read more

Week 4 - Spartan Superway Controls

This week, we began taking a look into the coding that was used on the previous bogie. Our main focus is to understand every section of the code, but with over 2000 lines of code it is proving to be difficult. We feel that it may be best if we break down the code and reuse only the parts that we believe we will need for the new Futran system. Because we are not using the Hall Effect sensors anymore and instead implement RFID tags to signal when to turn, we began by looking into the RFID.h library and the MFRC522 guides. Overall, we were able to get the cards to be recognized in the serial monitor and were able to rewrite them as well. After achieving this, we created a quick script that would turn the LED on the Arduino on if the correct RFID tag was read, and light up another LED if it did not have the right data. We were successfully able to do so and with this information we will be able to program our servo for switching between different tracks.  The next step is to und...
Read more